| ST 202 UDAV-M Cellular Jammer |
|

|
The Device ST-202 UDAV is intended as a means of protecting confidentiality during negotiations, by impeding the operation of mobile telephones and obstructing certain digital communications channels (Wi-Fi, Bluetooth, WiMax).
DISTINCTIVE FEATURES:
• ST 202 operates inconspicuously for the visitors and does not impede the use of mobile communication appliances outside its coverage area;
• ST 202 has a graphic display and a convenient interface for the adjustment of operation settings;
• suppression levels can be adjusted separately on each channel;
• suppression in non-suspect channels can be switched off by setting their power levels to minimum;
• ST 062 detector of mobile digital communications devices can be used to activate ST 202 unit upon detection of irradiation in one of the channels;
• ST 202 can be activated remotely via remote control port, or with the aid of an infrared remote control unit;
• ST 202 is equipped with an automatic cooler system;
• a wide range of power supply voltage (12-18V) can be used;
• unlimited operation time when powered from 220V mains. |
|
OPERATIONAL PRINCIPLE
ST 202 UDAV is a functionally complete unit. On its back panel a socket for connecting the power adapter, a remote control port, and a power switch are located. On the front panel there are a graphic display, control buttons, a power-on LED indicator, and an infrared receiver.
The functioning principle of the Device is based on blocking the service signals of communicative systems by barrage-jamming the corresponding frequency bands.
ST 202 stores all settings in its non-volatile memory, so one does not have to go through the setting up routine every time the Device is activated.
OPERATION IN COMBINATION WITH ST-062
In this mode the Device is to be connected to ST 062 detector of mobile digital communication devices, by way of a standard audio cable with 3.5 mm jacks.
Upon detection of digital signals (DECT, GSM, BLUETOOTH, WIFI, 3G, etc.) by ST 062, the Device becomes active for 1 minute. Within 30 sec of deactivation ST 202 returns to detector-controlled mode.
| Technical characteristics: |
| Number of independent channels |
10 |
| Maximum power output, Wt |
|
| CDMA450 |
0.8 |
| GSM900 |
1.8 per channel (2 channels) |
| GSM1800, DECT |
1.8 per channel (2 channels) |
| 3G |
1.5 per channel (2 channels) |
| 3G low |
1.5 |
| WI-FI, Bluetooth |
1 |
| WiMax (4G) |
1 |
| Type of antennae |
integrated dedicated-band |
| Operation time |
unlimited |
| Power supply |
100…240V / 50…60Hz via adapter (12-18 V, 90Wt) |
| Power consumption from 220V mains, Wt |
not exceeding 90 |
| dimensions, mm |
260 x 180 x 65 |
| Weight (without power unit), kg |
0.8 |
| Components: |
| 1. ST 202 “UDAV-M” unit |
1 pcs |
| 2. Power supply adapter (12V, 90Wt) |
1 pcs |
| 3. Technical description & operating manual |
1 pcs |
| 4. Packaging |
1 pcs |
| 5. Remote control unit |
optional |
|