ULAN-2 wire lines analyzer (discontinued product)
ULAN-2 wires lines analyser
                          		 This product is discontinued. Please contact us regarding alternative product

The ULAN-2 Universal Line Analyzer is designed to detect unauthorized connections to different wired lines, including telephone lines, AC networks, alarm circuits, etc.

The device is able to not only detect and identify threats, but using method of impulse location, also measure with high accuracy distance to the point of unauthorized connection.

SET:
  • Lines analyzer - main unit
  • UP-7 wiring tracer
  • Set of connecting cables and adapters
  • Headphones
  • AC network phase indicator
  • Carrying case

The ULAN-2 IS ABLE TO DETECT THE FOLLOWING TYPES OF UNAUTHORIZED CONNECTIONS AND SIGNALS:

In telephone lines (no disconnection with automatic exchange and no preliminary measurements of line parameters are necessary):
  • series connection with an equivalent impedance of over 30 Ω
  • parallel connection with current consumption of more than 0.1 mA
  • high frequency signals in line within 0.02÷30 MHz frequency band with effective voltage of more than 10 mV at symmetric and asymmetric connections
  • low frequency signals within 20÷20000 Hz frequency band with effective voltage of more than 10 mV
In AC networks under voltage:
  • "watch" devices with current consumption of more than 0.1 mA
  • high frequency signals within 0.02 ÷ 30 MHz frequency band with effective voltage of more than 10 mV
In currentless lines:
  • parallel connections with an active impedance up to 200 MΩ
  • series connections with an active impedance of more than 1 Ω
  • parallel connections via capacitor, with the response time of more than 100 sec
  • elements with non-linearity of 5% and more, within 0÷100 V frequency band
  • reactive elements with capacity of more than 100 pF and inductance of more than 10 mHn (excluding own line parameters)
In any types of lines (including those under voltage), in case the reflectogram was measured before:
  • series connections with an equivalent impedance of more than 1 Ω
  • parallel connections with an equivalent capacity of more than 5pF
  • parallel wire branches of any length
  • recovered damages in the line (breakage and twisting);
  • damages in wire lines due to installation of non-contact magnetic devices
ULAN-2 also provides the following possibilities:
  • measurement of AC and DC voltage in tested lines
  • measurement of resistance, capacity and inductance of tested lines
  • measurement of short-circuit current and loop resistance of telephone lines
  • listening and recording of audio signals in tested lines using headphones
  • display on the built-in LCD screen the following graphic information about tested lines: volt-ampere graph, impulse transient graph, telephone line load characteristic, parameter graph of output current as a function of input harmonic voltage (Lissajous graph), impulse reflectograms of wire lines
  • storage of measurements results in non-volatile memory
  • download of stored data to a PC via high speed USB port
  • location of wire lines hidden inside walls and building constructions when used in conjunction with UP-7
Product documentation and software:
FileDescriptionFile size
Download this file (ULAN-2-wires-analyzer.jpg)ULAN-2-wires-analyzer.jpgHQ picture142 Kb
Download this file (ULAN-2_wires_analyzer_user_manual.pdf)ULAN-2 Wires Analyzer.pdfUser Manual1701 Kb