ST-500 “PIRANHA“ – Multifunctional Detection Device

Portable new generation multifunctional device ST-500 PIRANHA is designed to detect various types of active eavesdropping devices, which transmit information using radio channel, wires and infrared channel.
Features
• Detection and localization of radio transmitting eavesdropping devices;
• Identification of digital protocols of detected radio signals: GSM, CDMA, Bluetooth, LTE, Wi-Fi;
• Identification of base station signals and mobile digital communication devices;
• Detection and localization of active wired eavesdropping devices;
• Activation of electret cable microphones by applying bias voltage in-line;
• Detection and localization of eavesdropping devices, which are transmitting information in the infrared range.
FUNCTIONALLY THE DEVICE CONSISTS OF FOUR DETECTION CHANNELS.
1. SELECTIVE HF DETECTOR – for detecting of analog and digital (using GSM, LTE, Bluetooth, Wi-Fi standards) radio transmitting eavesdropping devices in the frequency range of 20 – 6000 MHz;
2. IR DETECTOR – for detecting of IR transmitters (eavesdropping devices that use infrared frequency band to transmit the information);
3. WIRED RECEIVER – for detecting of high-frequency signals of eavesdropping devices that transmit information via power and low-current wire lines in the frequency range 100 kHz – 180 MHz;
4. LOW FREQUENCY AMPLIFIER – for detecting of the low-frequency signals of eavesdropping devices.
ST-500 PIRANHA allows analyzing detected signals in spectrum analyzer and oscilloscope modes. The device is controlled by using a convenient 12-button keyboard. Connecting the device to a PC and using the original software significantly increases the search capabilities of the device.
The interface of the device is simple and intuitively clear. During development of ST-500 PIRANHA the long-term operating experience of previous modifications of the PIRANHA device has been taken into account.
Delivery set consist of:
1. Main Unit – 1 pcs.
2. Adapter for connecting the main unit to electric mains – 1 pcs.
3. Cable for connecting the main unit to telephone line sockets – 1 pcs.
4. Cable for connecting the main unit to low current sockets – 1 pcs.
5. Cable for connecting the main unit to a PC’s USB – 1 pcs.
6. Telescopic antenna – 1 pcs.
7. Charger – 1 pcs.
8. Headphones – 1 pcs.
9. Charger cable for the test sound source – 1 pcs.
10. USB flash drive with manual and PC Software – 1 pcs.
11. Coupler (RJ11) – 1 pcs.
12. Coupler (RJ45) – 1 pcs.
13. 1×2 splitter (RJ11) – 1 pcs.
14. 1×2 splitter (RJ45) – 1 pcs.
15. Adapter for connecting a multicore cable and Screwdriver – 1 pcs.
16. Case – 1 pcs.
Technical characteristics:
SELECTIVE RF DETECTOR:
Operating frequency range 20 – 6000 MHz
Bandwidth 1,20 MHz
Input resistance 50 Ohm
Scanning speed 18 GHz / sec
Irregularity of Amplitude-Frequency Characteristic ± 6 dB
Minimum level of detectable signal – 70 dB
Dynamic range 50 dB
IR DETECTOR:
Spectral range 0,75 … 1,1 micron
Band of detection 5 MHz
Angle of view ± 20o
Minimum detectable power  10-13  W / Hz ½
WIRE RECEIVER:
Operating frequency range 0,1 – 180 MHz
Scan time of the whole range 2 sec
Minimum detectable signal -50 … -75 dBm
Dynamic range 50 dB
Input resistance 100 Ohm
Demodulation AM, FM
Input filter bandwidth 180 kHz
Maximal line voltage 250 (AC), 60 (DC) V
LOW FREQUENCY AMPLIFIER:
Frequency range 20 – 25000 Hz
Input resistance 200 kOhm
Gain control range  1, 2, 5, 10, 20, 50, 100 times
Maximum amplitude of the input signal  ±60 (DC), ±1 (АС) V
Spectral density of noise voltage 3 nV/Hz
Fixed values of bias voltage +30, -30 V
POWER SUPPLY:
Built-in lithium-polymer battery with voltage 3,7 V
Power consumption < 1 W
Continuous operation time at maximal power consumption > 4 hours
Charging time of a fully discharged battery 7 hours
WEIGHT AND DIMENSIONS:
Dimensions of the main unit L165 x W100 x H40 mm
Weight of the main unit 0.47 Kg
Packaging dimensions L390 x W310 x H170 mm
Weight when packed 4 Kg

Have a Question?

What would you like to know about this product?